Natural Look Wax Cartridge Heater
- Description
- Heat Settings
Natural Look Wax Cartridge Heater
Please read these instructions carefully prior to operating this device. The wax warmer is a professional device intended for the preparation of wax for use in hair removal.
WARNINGS: Use only with proprietary cartridges specifically designed for this product. Always test the temperature of the wax before applying to the skin. Do not immerse the device in water. Keep away from children.
INSTRUCTIONS: Heat wax for approximately 20-30 minutes until liquefied. If wax is to hot allow to cool to working temperature (approximately 55-65 degrees Celsius) For thermostat adjustment, rotate dial on back of cartridge. Roll (down) for high and roll (up) for lower temperature. (approximate adjustment 65C ~ 85C) Always test wax first before applying to skin. Apply natural look pre-wax prep in order to cleanse the skin Apply wax in the opposite direction of the hair growth Do not apply to blemishes, broken or irritated skin.
MAINTENANCE: Remove plug and switch off power before cleaning. Use soft fabric to wipe base and wax heater holder. Ensure that the wax heater is regularly cleaned with wax cleaner or waxing oil. Do not use solvents or abrasives for this purpose. The base connector can not connect any other appliance except the base. If the power line is damage, it must only be replace by an authorised electrician. NB not suitable for Lycon Cartridges
Heat Setting Recommendation:
Hair Type:
Fine l Delicate l Thin l Damaged
Heat Setting: 130c - 180c
-------------------------------------
Hair Type:
Normal l Coloured l Dry l Wavy
Heat Setting: 180c - 230c
-------------------------------------
Hair Type:
Thick l Curly l Course l Thick
Heat Setting: 210c - 230c