Choose your favourite pair of Sydney Lashes & Co lashes! You will need lash glue, scissors, and a mirror.

Remove the lash from the tray with lash tweezers.

Note: Lift lash off the tray fom the outer corner to avoid damaging the lashes with Lash Applicator or Tweezers.

Place the lash on your eye and measure.

Cut the lash for a custom look. Once you find your desired length, cut the lash band from the outer corner.
Pro Lash Tip: If there is excesses lash band on the inner side of the lashes, also cut that to avoid irritation on the inner eye once applied.

Apply a thin layer of Sydney Eyelash Glue to the eyelash entire lash band. No Need to Wait! Apply the eyelashes by looking down into a mirror.

Note: The Sydney Eyelash Glue is ready to use and already tacky! No need to wait!

Using the Sydney Lash Applicator, apply the lash to the center of your lash line. Connect the outer corner, then inner corner. Use the lash tool to clamp your natural lash and false lash together.

Note: Also use the Sydney Lash Applicator to safely remove the lashes from the tray. Hold the lash with the applicator when also applying glue to the lash band.

... and now you are Selfie ready!
Don't forget to tag us with the lash name at: @sydneyhairandmakeupco @sydneylashesandco

Your false lashes should be removed before beginning your makeup removal routine. You can soften the adhesive with a q-tip or cotton swab soaked in a good quality makeup remover or coconut oil.

Run the q-tip or swab along the lash line. Then, pull the lash by the outer corner and slowly peel the strip away from your real lashes. If you feel any pinching or resistance, then apply more oil or makeup remover and wait a little longer before trying again.